Configure Udp-Profile Add - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

configure udp-profile add

configure udp-profile <profile_name> add <udp_port> [vlan <vlan name> | ip
address <dest_ipaddress>]
Description
Configures a UDP-forwarding profile.
Syntax Description
profile_name Specifies a UDP profile name.
udp_port Specifies a UDP port number.
vlan name Specifies a VLAN name.
dest_ipaddress Specifies an IP address.
Default
N/A
Usage Guidelines
A maximum of 10 UDP-forwarding profiles can be defined. Each named profile may contain a
maximum of eight "rules" defining the UDP port, and destination IP address or VLAN. A VLAN can
make use of a single UDP-forwarding profile. UDP packets directed toward a VLAN use an all-ones
broadcast on that VLAN.
Example
The following command adds port 34 to UDP profile port_34_to_server:
configure udp-profile port_34_to_server add 34 ip address 10.1.1.1
History
This command was first available in ExtremeWare 6.1.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1686 ExtremeWare 7.7 Command Reference Guide