Configure Debug-Trace Transceiver-Test - Extreme Networks ExtremeWare Command Reference Manual

configure debug-trace transceiver-test

configure debug-trace transceiver-test <debug level>
Description
This command records debug information to the syslog.
NOTE
This command is available only on the "i" series switches.
Syntax Description
debug level
Default
The default level is 0.
Usage Guidelines
The
debug level
enables debug-trace for the transceiver testing.
For levels 2 through 5, debug-trace for transceiver testing is enabled, but no additional information is
recorded.
Example
The following command enables debug-trace for transceiver testing:
configure debug-trace transceiver-test 1
Following is sample log output at this level:
07/09/2003 15:09:14.02 <Info:TRXDIAG> trxdiag: EXT MAC test on slot 2 returns pass
07/09/2003 15:09:14.02 <Info:TRXDIAG> trxdiag: EXT MAC test on slot 4 returns pass
07/09/2003 15:09:14.02 <Info:TRXDIAG> trxdiag: CPU SRAM test on BPLNE returns pass
07/09/2003 15:09:14.02 <Info:TRXDIAG> trxdiag: CPU FLASH test on BPLNE returns pass
07/09/2003 15:09:14.02 <Info:TRXDIAG> trxdiag: CPU NVRAM test on BPLNE returns pass
07/09/2003 15:09:14.03 <Info:TRXDIAG> trxdiag: TWISTER test on BPLNE returns pass
07/09/2003 15:09:14.03 <Info:TRXDIAG> trxdiag: QUAKE test on BPLNE returns pass
07/09/2003 15:09:15.00 <Info:TRXDIAG> trxdiag: EXT MAC test on slot 1 returns pass
07/09/2003 15:09:15.00 <Info:TRXDIAG> trxdiag: EXT MAC test on slot 2 returns pass
07/09/2003 15:09:15.00 <Info:TRXDIAG> trxdiag: EXT MAC test on slot 4 returns pass
ExtremeWare 7.7 Command Reference Guide
Specifies a debug level:
0 — Disables debug tracing for the transceiver test and stops recording information to the syslog.
1 — Enables debug tracing for the transceiver test and records information to the syslog.
2 — No additional information recorded.
3 — No additional information recorded.
4 — No additional information recorded.
5 — No additional information recorded.
range is 0 to 5. Level 0 disables the debug-trace for the transceiver testing, and level 1
configure debug-trace transceiver-test
1231