Show Ssl - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

show ssl

show ssl {detail}
Description
Displays the Secure Sockets Layer (SSL) configuration.
Syntax Description
detail Specifies to display the information in detailed format.
Default
N/A
Usage Guidelines
This command displays the following information:
• HTTPS port configured. This is the port on which the clients will connect.
• Result of a check to see whether the private key matches with the public key stored in the certificate.
• Length of RSA key (number of bits used to generate the private key).
• Basic information about the stored certificate
The optional keyword
detail
certificate. Private key (in PEM format) is displayed for users with administration privileges.
Examples
The following command displays the SSL configuration:
show ssl
The output of the command is similar to:
HTTPS Port Number:
Private Key matches the Certificate's public key.
RSA Key Length: 1026
Certificate:
Data:
Version: 3 (0x2)
Serial Number: 0 (0x0)
Signature Algorithm: md5WithRSAEncryption
Issuer: C=us, O=93673, CN=extr
Validity
Not Before: Jul 23 14:00:07 2004 GMT
Not After : Jul 23 14:00:07 2005 GMT
Subject: C=us, O=93673, CN=extr
The following command displays the SSL configuration with the complete certificate.
show ssl detail
1094
provides the same output as the
443
command, plus the complete
show ssl
ExtremeWare 7.7 Command Reference Guide