Unconfigure Cpu-Dos-Protect - Extreme Networks ExtremeWare Command Reference Manual

unconfigure cpu-dos-protect

unconfigure cpu-dos-protect
unconfigure cpu-dos-protect
Description
Resets the denial of service protection configuration to default parameter values.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
This command does not change whether denial of service protection is enabled or disabled. To enable
or disable denial of service protection, use the following commands:
enable cpu-dos-protect
disable cpu-dos-protect
The default values for the denial of service protection parameters are as follows:
• alert-threshold—4000 packets per second
• notice-threshold—4000 packets per second
• timeout—15 seconds
• messages—on (messages are sent to syslog)
• filter-precedence—10
Example
The following command resets the denial of service protection configuration to the default values:
unconfigure cpu-dos-protect
History
This command was first available in ExtremeWare 7.0.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide 1107