Show System-Dump - Extreme Networks ExtremeWare Command Reference Manual

Troubleshooting Commands

show system-dump

show system-dump
Description
Displays the system-dump server IP and dump-timeout.
NOTE
This command is available only on switches with an Ethernet management port.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
Use this command to display configured parameters for a system dump transfer. Dump transfers
should not be initiated without the assistance of Technical Support.
Table 20 lists the fields displayed by this command.
Table 20: show system-dump command fields
Field Description
Server ip Displays the IP address to which a triggered system dump is sent. Indicates whether the server
is reachable through the VLAN mgmt.
Dump timeout Displays the time in seconds until a system dump transfer is halted.
To specify the IP address to which a system dump is sent, use the following command:
configure system-dump server
To specify the timeout, use the following command:
configure system-dump timeout
Example
The following command displays the system-dump server IP and dump-timeout:
show system-dump
Following is the output from this command with nothing configured:
Server ip : none
Dump timeout : none
1278 ExtremeWare 7.7 Command Reference Guide