Extreme Networks ExtremeWare Command Reference Manual page 1151

save configuration
The following command saves the current switch configuration in the primary configuration area of a
manager on a stack of switches:
save configuration primary
This command saves the current switch configuration in the primary configuration area for a stack
member:
save configuration slot 4 primary
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
This command was modified in ExtremeWare 7.4 to support stacking.
Support for the and keywords was added in ExtremeWare 7.4.
all slot
In ExtremeWare 7.7, modified the saving option for all ports in stacked switches.
Platform Availability
This command is available on all platforms. The , , and parameters are only supported
slot master all
on the Summit 200, Summit 300-24, and Summit 400 switches for stacking.
ExtremeWare 7.7 Command Reference Guide 1151