Clear Wireless Ports Interface Ap-Scan Results - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

clear wireless ports interface ap-scan results

clear wireless ports [<portlist> | all] interface [1 | 2] ap-scan results
Description
This command clears the scan results table.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
Default
N/A
Usage Guidelines
Use this command to clear the access point (AP) scan results on any interface: 1 or 2.
Examples
The following command clears the AP scan result table for port 1:18 on interface 1:
clear wireless port 1:18 interface 1 ap-scan results
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1294 ExtremeWare 7.7 Command Reference Guide