Show Netlogin Guest-Vlan - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

show netlogin guest-vlan

show netlogin guest-vlan {<portlist>}
Description
Displays the configuration for the guest VLAN feature.
Syntax Description
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and
ports. On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5,
2:5, 2:6-2:8.
Default
N/A
Usage Guidelines
If you do not specify any ports, the command output shows guest VLAN configuration for all ports.
Example
The following command displays information about the guest VLAN configuration:
Stk Master:15 # show netlogin guest-vlan port 1:1
The output from this command is as follows:
Netlogin DOT1X Guest-vlan configuration
Guest Supplicant Response Timeout
Port Guest-vlan
---------------------------------------
1:1 Enabled
* Stk Master:16 #
History
This command was first available in ExtremeWare 7.6.
Platform Availability
This command is available on all platforms.
1080
: 30
Vlan
visit
secs
ExtremeWare 7.7 Command Reference Guide