Extreme Networks ExtremeWare Command Reference Manual page 1057

#show access-list a1
Access-list with name "a1" created by user
Access-mask:
MAC:
IP/mask:L4port: dest-ip=11.11.11.0/24:---- source-ip=none/--:----
Layer 2:
Layer 3/4:
Egress Port:
Ingress Ports:
In Profile:
#show access-list port 2
Access-list "a1"
Access-mask:
MAC:
IP/mask:L4port: dest-ip=11.11.11.0/24:---- source-ip=none/--:----
Layer 2:
Layer 3/4:
Egress Port:
Ingress Ports:
In Profile:
The following command shows real-time access list statistics for ingress ports 5-7:
show access-list port 5-7
The following command shows information for access list test1:
show access-list test1
The command generates output similar to the following:
test1
Protocol: ip
Destination: 0.0.0.0/0 any
Source: any
Precedence: 0
Rule Number: 0
Hit Count: 4566 Flags: ac
Ports:
The following example shows output of the command on an "e" series switch:
Summit200-48:12 # show access-list acl1
Access-list "acl1"
Access-mask:
MAC:
IP/mask:L4port: dest-ip=none/--:---- source-ip=10.0.0.1/32:----
Layer 2:
Layer 3/4:
Egress Port:
Ingress Ports:
In Profile:
History
This command was first available in ExtremeWare 6.0.
ExtremeWare 7.7 Command Reference Guide
"f1"
2 3 4 5
permit QOS=QP5
"f1"
2 3 4 5
permit QOS=QP5
Action: permit qp1
any
any
"mask1"
all
deny
show access-list
1057