Troubleshooting Commands
upload system-dump
upload system-dump [<ip address>]
Description
This command transfers a system dump to an IP address.
NOTE
This command is available only on the "i" series switches.
Syntax Description
ip address
Specifies the IP address to which to transfer a system dump.
Default
N/A
Usage Guidelines
If you do not specify an IP address, the configured system-dump server IP address is used.
Example
The following command transfers a system dump to 10.10.10.1:
upload system-dump 10.10.10.1 3
History
This command was first available in ExtremeWare 6.2.2.
Platform Availability
This command is available only on platforms with an Ethernet management port.
1288
ExtremeWare 7.7 Command Reference Guide