Use Image - Extreme Networks ExtremeWare Command Reference Manual

use image

use image [primary | secondary]
Description
Configures the switch to use a saved image on the next reboot.
Syntax Description
primary
secondary
Default
N/A
Usage Guidelines
If you issue the
the
use image
To view information about the image selected for the next reboot, use the
Example
The following command configures the switch to use the primary image on the next reboot:
use image primary
History
This command was first available in ExtremeWare 2.0.
Support for the
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies the primary saved software image.
Specifies the secondary saved software image.
unconfigure switch all
command; it can be either a primary or secondary image.
parameter was introduced in ExtremeWare 7.0.0.
slot
command, you will still have the last configured value of
use image
command.
show switch
1163