Show Diagnostics - Extreme Networks ExtremeWare Command Reference Manual

show diagnostics

For the "i" series switches:
show diagnostics {slot [<slot number> | msm-a | msm-b | msm-c | msm-d]}
For the "e" series switches:
show diagnostics
Description
Displays information from the most recent diagnostic test run on the switch, as well as the status of the
system health checker on "i" series switches.
Syntax Description
slot number
slot-id-list
msm-a | msm- b |msm-c |msm-d
Default
N/A
Usage Guidelines
Use this command to display the status of the system health checker on "i" series switches, as well as
information from the last diagnostic test run on any switch. The switch diagnostics are displayed in a
tabular format with the day, month, date, year, and time of the diagnostic test at the top of the table.
Table 19 describes the fields that may be included in the command output. Refer to the examples in this
section to see how some of this information is presented.
Table 19: Show Diagnostics Command Field Definitions
Field
System Platform
System Part No.
Main Board No.
MAC Address
Slot
CPU System
Registers Test
Memory Test
System Test
ExtremeWare 7.7 Command Reference Guide
{slot [<slot-id-list>]}
Specifies the slot number of an I/O module.
NOTE: This option is available only on the "i" series switches.
Specifies that the command applies to one or more switches in a stack. The
slot ID is the number of the switch in the stack.
Specifies the MSM slot.
NOTE: This option is available only on the "i" series switches.
Definition
Specifies system type.
Specifies system part number, revision level, and serial number.
Specifies main board part number, revision level, and serial number.
Specifies system MAC address.
Specifies the slot for which the results are displayed.
NOTE: This option is available only on the "i" series switches.
Indicates diagnostic results.
Indicates diagnostic results.
Indicates diagnostic results.
Indicates diagnostic results.
show diagnostics
1265