Extreme Networks ExtremeWare Command Reference Manual page 1211

<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<DBUG:IPHS> last message repeated 3 times
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<DBUG:MSIG>
<DBUG:MSIG>
<DBUG:MSIG> DOWN_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG>
<DBUG:MSIG>
<DBUG:MSIG> DOWN_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG> SESS: 10.0.2.1 0 Peer: 100.100.61.1 0 NewSt:OPERATIONAL
EV:OTHER_MSG_RX
<DBUG:MSIG>
<DBUG:MSIG>
<DBUG:MSIG> UP_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG>
<DBUG:MSIG>
<DBUG:MSIG> UP_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG>
Peer: 100.100.61.1 0
<DBUG:MSIG> UP_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG>
<DBUG:MSIG> ING_UP_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG>
<DBUG:MSIG> ING_UP_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG>
<DBUG:MSIG>
<DBUG:MSIG> UP_FSM: FEC: 10.3.1.1/32
History
This command was first available in an ExtremeWare IP Technology Services Release based on
ExtremeWare v6.1.8b12.
Platform Availability
This command is available on the MPLS module.
ExtremeWare 7.7 Command Reference Guide
=> NewSt:DU_DORMANT
=> SESS: 10.0.1.1 0 Peer: 10.3.1.1 0
=> NewSt:ESTABLISHED
=> SESS: 10.0.1.1 0 Peer: 10.3.1.1 0
=> NewSt:IDLE
=> NH: 10.0.1.2 (4) SESS: 10.0.2.1 0 Peer: 100.100.61.1 0
=> NewSt:UPS_RLS_AWT
=> NH: 10.0.1.2 (4) SESS: 10.0.2.1 0 Peer: 100.100.61.1 0
=> NH: 10.0.1.2 (4) NewNH_NoRouteToDestination (0x2) SESS: 10.0.2.1 0
=> NH: 10.0.1.2 (4) NewSt:IDLE
=> NH: 10.0.1.2 (4) NewNH_NoRouteToDestination (0x2)
=> NewSt:ESTABLISHED
=> NH: 10.0.1.2 (4) SESS: 10.0.2.1 0 Peer: 100.100.61.1 0
OldSt:ESTABLISHED EV:INT_DEL_UPS
OldSt:ESTABLISHED EV:INT_DEL_UPS
OldSt:UPS_RLS_AWT
OldSt:ESTABLISHED
OldSt:EST
OldSt:RESP_AWAITED
configure debug-trace mpls-signalling
OldSt:OPERATIONAL
EV:RELEASE_REQ
EV:RTE_RECOMP_REQ
EV:RTE_RECOMP_REQ
EV:INT_DNS_MAP
1211