Show Source-Ip-Lockdown Ports - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

show source-ip-lockdown ports

show source-ip-lockdown ports
From ExtremeWare 7.7, this command is modified to:
show ip-security source-ip-lockdown ports [all| portlist]
Description
Displays the configuration of the source IP lockdown feature.
Syntax Description
portlist Specifies the port to which the rule has to be applied.
Specifies that the rule has to be applied to all ports.
all
Default
N/A
Usage Guidelines
Example
The following command displays the configuration of the source IP lockdown feature:
show source-ip-lockdown ports all
Or
show ip-security source-ip-lockdown ports all
The following new command displays the configuration of the source IP lockdown feature on port 1:7:
#show source-ip-lockdown ports 1:7
Or
show ip-security source-ip-lockdown ports 1:7
History
This command was first available in ExtremeWare 7.4.
This command is modifed in ExtremeWare 7.7.0. The new command is:
show ipsecurity source-ip-lockdown ports
Both the commands can be used in ExtremeWare 7.7.0.
1092
[all| portlist]
ExtremeWare 7.7 Command Reference Guide