System Programming Console - AT&T MERLIN LEGEND Release 3.1 System Programming Manual

System Programming Console

System Programming Console
The system programming console is an MLX-20L telephone connected to the
system programming jack. When you begin system programming on a new
system for the first time, the console must be connected to the first jack on the
first 008 MLX module or 408 GS/LS-MLX module (Release 2.0 and later
versions). This jack is factory set as the system programming jack and as an
operator position. When you program for the first time, you can change the
system programming jack to any one of the first five jacks on the first 008 MLX
module or 408 GS/LS-MLX module (Release 2.0 and later versions). This allows
you to program without interfering with the operator's call handling.
You can also have one or two Direct Station Selectors (DSSs) connected to the
system programming console. Each DSS adds 50 extension buttons to the
console, which facilitates assigning features to telephones.
An MLX-20L telephone with a DSS is shown in Figure 1–1.
Handset
Button
Labeling
Cards (2)
Line Buttons (20)
LED
Figure 1–1. MLX-20L Telephone with Direct Station Selector (DSS)
1–4
Programming Basics
Display Buttons
Display Screen
MLX-20L
More
Home
Menu Inspct
Message
v v
ABC DEF
Volume
1 2 3
Feature Transfer MNO
GHI JKL
4 5 6
HFAI
Conf
PQRS TUV WXYZ
7 8 9
Mute Drop
OPER
#
Speaker Hold
0
*
Volume Control
Dedicated Feature Buttons (8)
User Cards and Tray
LED
Direct
Station Selector
(DSS)
DSS
00 10 20 30 40
01 11 21 31 41
02 12 22 32 42
03 13 23 33 43
04 14 24 34 44
05 15 25 35 45
06 16 26 36 46
07 17 27 37 47
08 18 28 38 48
09 19 29 39 49
Message Light
Dialpad