AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 613

Optional Group Calling Features
Summary: Group Calling Overflow and
Thresholds
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Group Calling Message-Waiting Indicator
Use this procedure to designate the extension that will receive message-waiting
indications (MWIs) for the calling group.
Only one extension can be designated as a message-waiting receiver for each
calling group; however, more than one calling group can use the same
message-waiting receiver. The extension assigned as a message-waiting
receiver does not have to be a member of the calling group.
Message-waiting indications cannot be sent to the extension assigned to the
group unless this option is programmed. The message-waiting receiver cannot
distinguish between messages left for the calling group and personal messages.
System manager
All
Not required
Form 7d, Group Calling
Overflow coverage: none
Threshold: 1 call
Timeout: 0 sec
Overflow coverage: Backup extension number
Threshold: 1 to 99 calls
Timeout: 0 to 900 seconds
No
No
More
calling group ext. no.
Type backup ext. no.
of call
Dial ext. no.
Drop Dial no. of calls
Drop Dial no. of seconds
2
Type calling group ext. no.
2
+
+ Type no. of seconds
Programming Procedures
Dial
Type no.
4–241