AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 516

PRI Facilities
Incoming Routing
Use this procedure to specify whether incoming routing is by line appearance or
according to dial plan. Dial Plan Routing is available in Hybrid/PBX mode only.
Summary: Incoming Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Incoming Routing
Console Display/Instructions
1 Select the Lines and Trunks menu.
_
2 Select PRI.
4–144
Programming Procedures
System manager
Line appearance: Hybrid/PBX, Key; Dial Plan Routing:
Hybrid/PBX only
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Line appearance
Dial Plan Routing, Routing by Line Appearance
No
No
B-channel group no.
Specify method of routing
Additional Information
_
Specify method of routing
Type B-channel group no.
Dial
PC