AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 105

Using SPM
2 Press the function key that corresponds to the module you want to select.
If the module you want to assign is not shown on the first screen of the Boards menu, press
to display the next menu screen.
3 Type the control unit slot number (01 through 17) in which the module is to be
installed.
4 Assign or remove the module from the slot entered in Step 3.
To remove the module type from the specified slot number, press
(
Delete
To assign the module type to the specified slot number and assign that
same module type to another slot, press
To assign the module type to the specified slot number and assign a
different module type to another slot, press
To terminate the procedure and assign a different module, press
(
To view types of modules assigned to all slots, press
5 Save your entry.
Select
Exit. Exit.
module name = option selected in Step 2
module name = option selected in Step 2
nn = slot entered in Step 3
). The Boards menu reappears.
) and repeat Steps 2 through 4.
Exit
The programming session terminates and
the system restarts.
( ).
Next
( ).
Enter
(
Inspect
Programming with SPM
).
2–27