AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 277

Optional Group Calling Features
Console Display/Instructions
9 Save your entry.
Select or
10 Return to the System Programming menu.
Select two times.
Group Calling External Alert for Calls-In-Queue
Alarm
Use this procedure to designate the external alert device used to notify calling
group members when the number of calls in the queue reaches the
programmed threshold.
Only one external alert device can be designated for each calling group. Since
the external alert signal is continuous, it is recommended that only light-type
external alert devices be designated for the Calls-in-Queue alarm.
Summary: Group Calling External Alert for
Calls-In-Queue Alarm
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
Use program the next calling group.
Return to Step 7.
System manager
All
Not required
Form 7d, Group Calling
Not applicable
Extension number
No
No
More
calling group ext. no.
alert
2
+ Type ext. no. for alert
Common Administrative Procedures
Drop Dial ext. no. for
Type calling group ext. no.
PC
Dial
3–141