AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 567

Telephones
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To copy to a single extension:
PC Procedure
Assign Intercom or System Access Buttons
Use this procedure to assign or change the assignments for Intercom (ICOM)
buttons used to make and receive inside calls. This includes the following types
of Intercom buttons:
Ring
Voice
Originate Only (Ring or Voice)
In Hybrid/PBX mode only, use this procedure to assign or change assignments
for System Access (SA) buttons used to make or receive inside and outside
calls. This procedure includes the following types of System Access buttons:
Ring
Voice
Originate Only (Ring or Voice)
Shared (Ring or Voice)
4a, Extension Copy: Analog Multiline Telephone Template
4c, Extension Copy: MLX Telephone Template
Not applicable
Not applicable
Yes: lines/pools assigned to an extension.
Not applicable
Extensions Line Copy
Enter
Dial copy to ext. no.
To copy to a block of extensions:
Extensions Line Copy
Enter
Dial ext. no of first telephone in block
Dial ext. no of last telephone in block
Exit
To copy to a single extension:
Type copy from ext. no.
copy to ext. no.
To copy to a block of extensions:
Type copy from ext. no.
ext. no. of first telephone in block
last telephone in block
Single
Dial copy from ext. no.
Enter Exit
Block
Dial copy from ext. no.
Enter
Type ext. no. of
Programming Procedures
Exit
Enter
Exit
Type
Type
4–195