AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 438

Lines and Trunks
Console Display/Instructions
3 Enter the trunk number to copy to.
NNN
4 Continue to copy options from this trunk or to another trunk or go to Step 5.
Next Next
Select .
5 Save your entry.
Enter Enter
Select .
6 Return to the System Programming menu.
Exit
Exit
Select three times.
Block Of Trunks Procedure
1 Enter the trunk number to copy from.
2 Save your entry.
Enter
Enter
Select .
3 Enter the first trunk number to copy to.
NNN
4–66
Programming Procedures
Additional Information
xxx = "copy from" trunk entered in Step 1
Dial or type:
Trunk number [ nnn ]
*
Slot and port number
#
Logical ID number [ nnn ].
Return to Step 3. The next QCC operator
will be displayed on Line 1.
Dial or type:
Trunk number [ nnn ]
*
Slot and port number
#
Logical ID number [ nnn ].
If you get the Station Busy message, wait
for an idle condition or exit system
programming and try again later .
xxx = "copy from" trunk entered in Step 1
Dial or type:
Trunk number [ nnn ]
*
Slot and port number
#
[ nnn ].
Logical ID number
PC
[ sspp ]
[ sspp ]
[ sspp ]