AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 257

Optional Group Features
Console Display/Instructions
7 Specify the extension.
NNNN
8 Assign or remove the extension from the calling group.
Enter
Enter
Select or
Delete Delete
.
9 Continue to assign the extension to another calling group or go to Step 10.
Next Next
Select
10 Return to the System Programming menu.
Exit
Exit
Select three times.
Group Calling Line/Trunk or Pool Assignments
Use this procedure to assign or remove lines, trunks, or pools (Hybrid/PBX only)
that ring directly into a calling group.
Incoming calls on each line/trunk or pool can be directed to only one calling
group.
To reassign a line/trunk or pool to a new calling group, you must remove it from
its old group before making the new assignment.
Additional Information
xxxx = number entered in Step 5
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 9.
On = extension is a member of the calling
group.
Off = extension is not a member of the
calling group.
You may continue to assign or remove
extensions from the calling group by
repeating Steps 7 and 8.
Return to Step 7 to continue programming. The
next calling group will be displayed on Line 1.
Common Administrative Procedures
PC
3–121