AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 41

Programming Procedures
LinesTrunks
LS/GS/DS1
* (DS1)
- Type
- T1
- GroundStart
- Loop Start
- TIE
- TIE-PBX
- Toll
- S56
- Unequipped
- All Ground
- All Loop
- All TIE
- TIE-PBX
- Toll
- S56
- All Unequip
- DID
- All DID
- S56 Data
- Direction
- Intype
- Outtype
- AnsSupv
- Disconnect
- Inmode
- Outmode
- All S56Data
- Direction
- Intype
- Outtype
- AnsSupv
- Disconnect
- Inmode
- Outmode
- PRI
- Frame Format
- D4 Compatible
- Extended Super
Frame
-Suppression
- AMI ZCS
- B8ZS
- Signaling
- Robbed Bit
- Common Channel
Description
Lines/Trunks options
Loop-start, ground-start or DS1 options
DS1 options
Type of DS1 facility
Ground-start emulation on selected channels
Loop-start emulation on selected channels
Tie Trunk emulation on selected channels
Tie-PBX transmit/receive loss parameter
Toll transmit/receive loss parameter
Switched 56 Data
Unused channels
Ground-start emulation on all channels
Loopstart emulation on all channels
Tie Trunk emulation on all channels
Tie-PBX transmit/receive loss parameter
Toll transmit/receive loss parameter
Switched 56 Data
All channels unequipped
DID emulation on selected channels
DID emulation on all channels
Switched 56 Data
All Switched 56 Data
Primary Rate Interface
Framing format for the 100D module
Type of zero code suppression
Signaling mode
Page
4–68
4–86
4–88
4–90
Programming Basics
1–25