AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 230

Optional Telephone Features
Console Display/Instructions
3 Enter the logical ID of the first extension in the block to which you want to copy
call restrictions ( nnn = 1 to 144).
NNNN
4 Save your entry.
Enter
Enter
Select .
5 Enter the logical ID of the last extension in the block ( nnn = 1 to 144).
6 Save your entry.
Enter Enter
Select .
7 Return to the System Programming menu.
Exit
Exit
Select three times.
ARS Restriction Level For Extensions
Use this procedure to assign an ARS restriction level to an extension. Outgoing
calls can only be made to routes that have a Facility Restriction Level (FRL)
lower than or equal to that of the extension where the call is being made. Only
outgoing calls are affected; users can receive inside, local, and toll calls on
restricted telephones and can join any type of call in progress.
The restriction level assigned to extensions is opposite to the FRL assigned to
routes, where 0 is the most and 6 is the least restrictive.
Summary: Assigning ARS Restriction Level For
an Extension
Programmable by
Mode
Idle Condition
3–94
Common Administrative Procedures
xxxx = extension entered in Step 4
Dial or type # [ nnn ].
NNNN
xxxx = extension entered in Step 1
Dial or type # [ nnn ].
System manager
Hybrid/PBX only
Not required
Additional Information PC