AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 272

Optional Group Calling Features
Console Display/Instructions
15 Erase the current timeout ( xxx ).
NNNN
NNN
16 Enter the maximum time (in seconds) in the queue before coverage
( xxx = 0 to 900).
17 Save your entry.
Enter Enter
Select .
18 Return to the System Programming menu.
Exit Exit
Select three times.
Group Calling Message-Waiting Indicator
Use this procedure to designate the extension that will receive message-waiting
indications (MWIs) for the calling group.
Only one extension can be designated as a message-waiting receiver for each
calling group; however, more than one calling group can use the same
message-waiting receiver. The extension assigned as a message-waiting
receiver does not have to be a member of the calling group.
Message-waiting indications cannot be sent to the extension assigned to the
group unless this option is programmed. The message-waiting receiver cannot
distinguish between messages left for the calling group and personal messages.
Summary: Group Calling Message-Waiting
Indicator
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
3–136
Common Administrative Procedures
Additional Information
xxxx = number entered in Step 5
Press Drop.
Dial or type [ xxx ].
System manager
All
Not required
Form 7d, Group Calling
No message-waiting receiver assigned
Extension number
No
No
PC
2