AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 611

Optional Group Calling Features
Console Procedure
PC Procedure
Group Calling Delay Announcement
Use this procedure to designate the announcement device used to play
messages to callers while they are waiting in the queue.
Only one announcement device can be designated for each calling group;
however, more than one calling group can use the same announcement device.
The extension to which the delay announcement device is connected should not
be programmed as a calling group member.
If the extension jack or MFM was previously programmed as a regular extension,
you must remove all line/trunk button assignments before you designate the
extension jack as a delay announcement device.
Summary: Group Calling Delay Announcement
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
More
calling group ext. no.
or
System manager
All
Not required
Form 7d, Group Calling
No delay announcement devices are assigned
Announcement, No announcement
No
No
More
calling group ext. no.
announcement device
Type ext. no. of announcement device
or
Type calling group ext. no.
Dial ext. no. of
Type calling group ext. no.
Programming Procedures
Dial
Dial
4–239