AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 638

Remote Access Features
Console Display/Instructions
7 Continue to assign the remote access status to another line/trunk or go to
Step 8.
Select .
8 Save your entry.
Select .
9 Return to the System Programming menu.
Select two times.
Remote Access Automatic Callback
Use this procedure either to allow remote access users to use the Automatic
Callback feature to request busy lines/trunks or pools or to prevent use of the
Automatic Callback feature.
NOTE:
This feature applies to Hybrid/PBX mode only.
Summary: Remote Access Automatic Callback
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
4–266
Programming Procedures
Additional Information
Return to Step 6. The next line/trunk will be
displayed on Line 1.
System manager
Hybrid/PBX
Not required
Form 3a, Incoming Trunks: Remote Access
Disable
Disable, Enable
No
No
or
PC
or