AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 101

Using SPM
Maintenance data (error logs and other data used by qualified service
technicians) is not saved in the backup file.
Follow the steps below to perform the backup procedure.
1 At the SPM Main Menu, press
2 Follow the instructions for a floppy or a hard disk.
A second window appears which displays the
options and a directory listing for the C:\spm\backup directory.
If you are saving the backup file to a floppy disk, go to Step 3.
If you are saving the backup file to the hard disk, go to Step 4.
3 Remove the SPM diskette and insert a formatted diskette. Use the arrow keys to
highlight
After you press
Step 4.
The screen displays the default name for the backup file (
4 Specify a backup filename.
To select the default filename use the arrow keys to highlight
and press
To enter a different filename use the arrow keys to select
and press
to select
4
and press .
4
, the
and the directory listing for A:\ is displayed. Continue with
4
. Go to Step 6.
4
. Go to Step 5.
.
and
statement shown above changes to
Programming with SPM
. ).
.
2–23