AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 419

Lines and Trunks
Console Display/Instructions
6 Specify the QCC priority lines.
NN
_
_
_
_
Single Line Procedure
1 Specify entry mode.
Entry Mode Entry Mode
Select
2 Enter the line or trunk with the specified queue priority.
N
3 Assign or remove the line/trunk from the specified QCC priority level.
Enter
Enter
Select or
Delete Delete
.
4 Continue to assign or remove lines or trunks, or go to Step 5.
Next Next
Select .
5 Save your entry.
Enter
Enter
Select .
6 Return to the System Programming menu.
Exit Exit
Select two times.
x = QCC queue priority entered in Step 4
_
For a single line, go to
Single Line Procedure.
For a block of lines, go to
Block Procedure.
.
Dial or type:
Trunk number [ nnn ]
Slot and port number
Logical ID number
You may continue to assign or remove the
QCC priority level from additional
lines/trunks by repeating Steps 2 and 3.
Return to Step 2. The next QCC priority
level will be displayed on Line 1.
Additional Information
*
[ sspp ]
#
[ nnn ].
Programming Procedures
PC
4–47