AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 319

System Features
Console Display/Instructions
3 Enter the list ( I = 0 to 7) and entry ( e = 0 to 9) numbers.
4 Save your entry.
Enter Enter
Select .
5 Erase the current area code/exchange ( nnnnnn ).
l
nnnnnn
6 Enter the allowed area code/exchange (up to 6 digits).
7 Save your entry.
Enter
Enter
Select or
Next Next
8 Return to the System Programming menu.
Exit Exit
Select .
Assign Allowed Lists to Telephones
Use this procedure to assign individual telephones access to established
Allowed Lists. More than one Allowed List can be assigned to a telephone.
Summary: Assign Allowed Lists to Telephones
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
If you do not enter a list number, List 0
is assigned.
Dial or type [ le ].
e
l = list number entered in Step 3
e = entry number entered in Step 3
Press Drop.
Dial or type [ n ].
Next
Next
Use
list displayed on Line 1. Return to Step 7.
System Manager
All
Not required
Form 6g, Call Restriction Assignments and Lists
Not applicable
0 to 7
Common Administrative Procedures
Additional Information
to enter the next number on the
PC
2
3–183