AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 673

Automatic Route Selection
Console Display/Instructions
2 Select Automatic Route Selection.
3 Select other digits for Subpattern A or B.
4 Enter the table ( nn = 1 to 18) and the route ( m = 1 to 6) number.
N
5 Save your entry.
Select .
6 Erase the current number of other digits ( n ).
NN
n
7 Enter up to 20 other digits ( n = any combination of 0 to 9).
8 Continue to specifiy other digits for another route in the specified subpattern or
go to Step 9.
Select .
_
_
Select
Press More and
select
x = subpattern selected in Step 3
Dial or type [ nnm ].
N
xx = table number entered in Step 4
x = route number entered in Step 4
Press Drop.
Dial or type [ n ].
Return to Step 6. The next route number
will be displayed on Line 1.
Additional Information
.
.
Programming Procedures
PC
F
4–301