Access To System Programming From The Mlx-20; Console - AT&T MERLIN LEGEND Release 3.1 System Programming Manual

Access to System Programming
from the MLX-20 Console
Access to System Programming
from the MLX-20 Console
Follow the steps below to begin system programming. All of the procedures in
Chapter 3, "Common Administrative Procedures" and Chapter 4, "Programming
Procedures," begin at the System Programming menu shown in Step 4 of the
following procedure.
For information about accessing system programming through a PC with SPM,
see Chapter 2, "Programming with SPM."
Console/Display Instructions
1 Display the Menu Mode (main menu) screen.
2 Select System Programming.
3 Display the System Programming menu.
NNNN
NNNNN
NNNNNNNNN
NNNNNNNNN NNNNNNNNN
_
Additional Information
Press .
Menu
does not appear on this
screen if the programming console is
a QCC.
_
On the System Set-up screen, system
information appears in place of the x s.
= Voice/Data
= Key, Hybrid/PBX, or Behind Switch
= Position extension numbers
Select .
PC
Programming Basics
1–39