AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 224

Optional Telephone Features
Console Display/Instructions
2 Select Dial-Out Code.
_
3 Specify the extension.
4 Save your entry.
Enter
Enter
Select
5 Enter the pool dial-out code.
NNNN
6 Allow or restrict the extension from using the pool dial-out code.
Enter Enter
Select or
Delete Delete
.
7 Continue to program pool dial-out codes for another extension or go to Step 8.
Next Next
Select
8 Return to the System Programming menu.
Exit Exit
Select two times.
3–88
Common Administrative Procedures
Additional Information
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 5.
On = pool dial-code is assigned.
Off = pool dial-code is not assigned.
If you get the Station Busy message, wait
for an idle condition or exit system
programming and try again later .
xxxx = extension entered in Step 3
Dial or type [ nnn ].
You may continue to allow or restrict
additional pool dial-out codes from this
extension by repeating Steps 5 and 6.
Return to Step 5 to continue programming. The
next extension will be displayed on Line 1.
PC