AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 168

QCC Optional Features
Console Display/Instructions
4 Specify whether calls on hold return to the QCC queue or remain on hold when
the hold timer expires twice.
_
_
5 Save your entry.
Select .
6 Return to the System Programming menu.
Select two times.
Automatic Hold or Release
Use this procedure to specify whether a call in progress (on a call button) is
automatically put on hold (Automatic Hold) or disconnected (Automatic Release)
when the operator presses another button.
This option cannot be programmed for individual QCC operator positions. The
single setting applies to all QCC operator positions.
Summary: Automatic Hold or Release
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3–32
Common Administrative Procedures
Additional Information
Select
System manager
All
Not required
Form 6a, Optional Operator Features
Automatic Release
Auto Hold, Auto Release
No
No
or
or
.
PC
or