AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 279

Optional Group Calling Features
Console Display/Instructions
6 Save your entry.
Enter Enter
Select .
7 Erase the current external alert extension ( nnnn ) if assigned.
NNNN
nnnn
8 Specify the extension.
9 Save your entry.
Enter
Enter
Select .
Next Next
10 Return to the System Programming menu.
Exit Exit
Select two times.
Group Type
Use this procedure to determine whether or not the system automatically logs in
members of a calling group after a power failure. This setting also determines
the type of voice messaging interface when the calling group is used to connect
voice messaging or automated attendant applications. The settings are listed
below.
Automatic Log Out. Used for calling groups to specify that the system
does not automatically log in calling group members after a power failure.
Calling group members must manually log themselves into the group.
Automatic Log In. Used for calling groups that consist of fax machines or
data stations (also called data hunt groups) to specify that the system
automatically logs in calling group members after a power failure. This
setting can also be used for calling groups consisting of telephones.
Additional Information
xxxx = number entered in Step 5
Press Drop.
If no DSS is attached:
SP: "Entering an Extension"
Next
Next
Use to program the next calling
group. Return to Step 7.
Common Administrative Procedures
PC
2
3–143