AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 29

Programming Procedures
Verifying Data Entry
You can use the Inspect feature to view the entries you save. An example of how
to use the Inspect feature begins with Figure 1–8. The figure shows a data entry
screen with the first (of two) required extension numbers needed to assign
analog voice and data.
Figure 1–8. Inspect Example
After you enter and save
sequential extension jack number. This extension jack pair does not appear on
the data entry screen; however, if you press Inspct (
appears, as shown on the sample Inspect screen in Figure 1–9.
Figure 1–9. Sample Inspect Screen
Whenever you want to return to the previous screen, select
The Inspect feature also allows you to check a value currently programmed for a
feature. This is helpful when you are changing or modifying features. You can
also use it when you program sequential extensions or lines to verify the last
number programmed. See the Feature Reference for details about the Inspect
feature.
Selected Option
Prompt
Extension entered
, the system automatically assigns the next
Inspect data displayed
@
on the PC), the pair
#
( on the PC).
Programming Basics
1–13