AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 509

PRI Facilities
Single Line Procedure
Console Display/Instructions
1 Specify entry mode.
Select
2 Enter a line number.
3 Assign or remove the line number from the B-channel group.
Select or
.
4 Continue to assign the line number to another B-channel group or go to Step 5.
Select .
5 Save your entry.
Select .
6 Return to the System Programming menu.
Select three times.
Block Procedure
1 Specify the block of 20 lines associated with 20 buttons on the system
programming console.
Select
2 Assign the line(s) to the B-channel group.
3 Return to the System Programming menu.
Select three times.
.
NN
xx = number entered in Step 12
Dial or type [ nnn ].
You may continue to assign or remove
additional lines from the B-Channel group
by repeating Steps 7 and 8.
Return to Step 2. The next group will be
displayed on Line 1.
.
Toggle the green LED on or
off as required.
On = lines are assigned to B-channel.
Off = lines are not assigned to B-channel.
Additional Information
Programming Procedures
PC
4–137