AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 388

System Renumbering
Procedure: Select System Numbering Plan
Console Display/Instructions
1 Select the System Renumbering menu.
_
2 Select Default Numbering.
_
3 Select the appropriate system numbering plan.
_
_
_
4 Observe the initialize space screen.
_
5 Select the type of extension to renumber.
_
_
4–16
Programming Procedures
Additional Information
If you get the System Busy message,
wait for an idle condition or exit system
programming and try again later.
Select and go to Step 5.
Select and go to Step 5.
Select and continue with
Step 4.
If you selected
you have finished this procedure.
Select and go to Step 6.
To change individual extension numbers,
select and go to "Single
Renumbering."
To change a block of extension numbers,
select and go to "Block
Renumbering."
PC