Programming Speed Dialing Codes - AT&T SYSTEM 25 User Manual

Programming Speed Dialing Codes

You can program telephone numbers, account codes, and
System Speed Dialing codes into your Personal Speed Dialing
codes. System 25 allows you to program strings of numbers and
special characters (maximum of 25 characters) into the dialing
codes.
part of this entry describes, with examples, how to use
The first
special characters when programming. The remaining part of
this entry describes how to actually program or remove Personal
Speed Dialing codes.
Special Characters
You may use the "*" and the " # " in various capacities when you
program numbers. The "*" may be used as a 1.5 second pause
or as an actual character, The " # " may be used as an actual
character, as the start of a System Speed Dialing code, or as the
start of end-to-end signaling.
Using * for Pausing
A " * " (by itself) will produce a 1.5 second pause.
For example, you may want to program a pause between the
outside line access code (9) and the telephone number.
You program: 9*5557023
This means: 9 (1.5 second pause) 5557023
(Continued)
25