AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 870

Glossary
SID
simplex signaling
signaling
single-line
telephone
slot
SMDR
SMDR printer
Software Defined
Network
special character
SPM
square key
station
station jack
Station Message
Detail Recording
Supplemental Alert
Adapter
switchhook flash
[station (extension) identification]
Transmission of signals in one direction only across a
telecommunications channel.
Sending of control and status information between devices
to set up, maintain, or cease a connection such as a
telephone call.
Industry-standard touch-tone or rotary-dial telephone that
handles only one call at a time and is connected to the
system via an extension jack on a basic 012 or 008 OPT
module.
Position in a carrier for a module; numbered from 0
( processor module ).
(Station Message Detail Recording) Feature that captures
detailed usage information on incoming and outgoing voice
and data calls.
Printer used to produce SMDR reports. Connected to the
system via an RS-232 jack on the processor module.
See SDN .
Pause, Stop, or End-of-Dialing signal in a programmed
dialing sequence such as an Auto Dial or Personal Speed
Dial number.
(System Programming and Maintenance) DOS - or UNIX
system-based application for programming and
maintaining the system.
Configuration in Key mode operation in which all outside
lines appear on all telephones.
See extension .
See extension jack .
See SMDR .
See SAA .
Momentary (320 ms to 1 second) on-hook signal used as a
control signal. May be directed either to the control unit or
to a host switch outside the system. Also called "Recall" or
"timed flash."
GL–23
System Programming