AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 426

Lines and Trunks
Single Line Procedure
Console Display/Instructions
1 Specify entry mode.
Select
2 Enter the line/trunk number for LS-ID Delay.
3 Assign or remove the LS-ID Delay.
Select or
.
4 Return to the System Programming menu.
Select two times.
Block Procedure
1 Specify the block of 20 lines associated with the 20 line buttons on the system
programming console.
Select
2 Assign the LS-ID Delay to the appropriate lines/trunks.
3 Return to the System Programming menu.
Select two times.
4–54
Programming Procedures
.
Dial or type:
Trunk number [ nnn ]
Slot and port number
Logical ID number
You may continue to assign or remove the
LS-ID delay from additional lines/trunks by
repeating Steps 2 and 3.
.
Toggle the green LED on or
off as required.
On = assign the LS-ID Delay
Off = remove the LS-ID Delay
Additional Information
*
[ sspp ]
#
[ nnn ].
PC