AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 109

Using SPM
6 If converting from Release 1.0 or 1.1, select the CONVERT TO release. To
convert from Release 1.2, 2.0, or 2.1 go to Step 7.
The screen below appears when converting from Release 1.0 or 1.1.
N
7 Follow the instructions for a floppy or a hard disk.
If the CONVERT TO file will be saved to a floppy disk, go to Step 8.
If the CONVERT TO file will be saved to the hard disk, go to Step 9.
8 Use the arrow keys to highlight
,
After you press
Drive A appears. Continue with Step 9.
,
9 Specify a filename for the converted file.
Highlight the name of the file you want to convert to, press
to Step 11.
To enter a different filename, use the arrow keys to select
and press
All characters must be entered as they
appear on the screen, including the
decimal point.
4
, the
and the directory listing from the root directory of the disk in
4
.
4
and press .
statement shown above changes to
Programming with SPM
4
and go
2–31