Recall Timer - AT&T MERLIN LEGEND Release 3.1 System Programming Manual

System Features
Console Display/Instructions
3 Select Behind Switch.
_
4 Specify the feature to which you want to assign a dial code.
_
_
_
Erase the current host system dial code ( xxxxxx ).
5
NNNNNN
6 Enter the host system dial code (up to 6 digits).
7 Save your entry.
Select .
8 Return to the System Programming menu.
Select two times.

Recall Timer

Use this procedure to designate the length of the timed flash that is sent when
Recall is used to disconnect a call and get a new dial tone without hanging up.
Both the interval of the timed flash and how Recall works depend on the type of
telephone and system operating mode.
Additional Information
Select ,
, or
.
**** = option name selected in Step 4
Press Drop.
Dial or type [ n ].
Common Administrative Procedures
PC
2
3–179