AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 498

DID Trunks
Console Display/Instructions
9 Save your entry.
Select .
10 Return to the System Programming menu.
Select two times.
Signaling
Use this procedure to specify whether the type of dialing signal from the local
telephone company is touch-tone or rotary. Touch-tone dial mode cannot be
programmed for immediate-start DID trunks.
Touch-tone single-line telephone users cannot make calls by using individual
trunks programmed for rotary operation. The touch-tone signals generated from
the telephone while dialing are transmitted to the central office at the same time
the rotary signals are sent to the system. The central office receives both signals
and cannot process the call.
Summary: Signaling
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
4–126
Programming Procedures
Additional Information
System manager
Hybrid/PBX
Not Required
Form 3d, Incoming Trunks: DID
Rotary
Rotary, Touch-tone
No
No
or
Type trunk block no.
PC
Dial trunk block no.
or