Planning Your Merlin Ii System: Part Two; Station Configuration Forms; Cms Supervisor'smerlin Ii System Display Console - AT&T MERLIN II Feature Module 2 Planning Manual

Planning Your MERLIN II System: Part Two

Station Configuration Forms

CMS SUPERVISOR'S
MERLIN II SYSTEM
DISPLAY CONSOLE
You can resume planning your MERLIN II system following the instructions
in the MERLIN II System Planning Guide. As you come to each new section
and planning form, refer back to this guide for information pertaining to
CMS. The information in this part of the guide is organized under headings
that are the same as or very similar to the corresponding headings in the
MERLIN II System Planning Guide. If you don't find any remarks in this guide
regarding a MERLIN II system setting, you can assume the setting does not
affect CMS operation.
You'll need a Station Configuration Form for the attendant console at the
CMS supervisor's station and one for each CMS agent's voice terminal. Keep
the following points in mind as you complete the forms.
The supervisor's attendant console is the MERLIN II System Display Console.
Use the information under "Line Buttons" and "Auto Intercom Buttons"
below to supplement the instructions in the MERLIN II System Planning Guide
as you complete a Station Configuration Form for the CMS supervisor's voice
terminal.
Line Buttons
Each MERLIN II system telephone line assigned to CMS should appear at a
line button (with lights) on the CMS supervisor's console. Follow the order
on your CMS Line Button Planning Form as you assign lines to buttons on
the Station Configuration Form for the CMS supervisor's console.
The CMS supervisor's attendant console can also have other
NOTE:
lines or line pools assigned to it.
Auto Intercom Buttons
Each CMS agent station should be represented by a button with lights (an
Auto Intercom button) on the CMS supervisor's console. Use the information
and illustrations in the MERLIN II System Planning Guide under the heading
"Line Assignments" to fill in the boxes representing line buttons on the
supervisor's Station Configuration Form. Also note the information under
"Auto Intercom Buttons" which shows how to account
buttons on the supervisor's form.
Figure 10 shows a portion of the Station Configuration
Voyage Travel's CMS supervisor.
for Auto Intercom
Form filled out for Bon
Planning Your MERLIN II System: Part Two 27