AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 217

Fax Machines
Console Display/Instructions
7 Select Message Waiting.
_
8 Enter the extension for the fax machine that will send the message-waiting
indication.
9 Save your entry.
Enter
Enter
Select .
10 Specify the extension to receive the message-waiting indication.
NNNN
11 Assign or remove the extension to receive the message-waiting indication.
Enter Enter
Select or
Delete Delete
.
12 Continue to assign the message-waiting indication to another fax extension or
go to Step 13.
Next Next
Select
Additional Information
SP: "Entering an Extension"
xxxx = number entered in Step 8
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 13.
On = assign message-waiting indication
to extension.
Off = remove message-waiting indication
from extension.
You may continue to assign or remove
message-waiting indication to additional
extensions by repeating Steps 10 and 11.
Return to Step 10 to continue programming. The
next fax extension will be displayed on Line 1.
Common Administrative Procedures
PC
3–81