AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 537

PRI Facilities
Total Digits Procedure
Console Display/Instructions
1 Enter the entry number ( nn = 0 to 15).
2 Save your entry.
Enter Enter
Select .
3 Erase the current number of total digits ( nn ).
nn
4 Enter the new total number of digits ( nn = 0 to 14).
5 Continue to assign the digits to another routing entry or go to Step 6.
Next
Next
Select .
6 Save your entry.
Enter Enter
Select .
7 Program additional options by returning to Step 4 of the main procedure or go to
Step 8.
8 Return to the System Programming menu.
Exit Exit
Select three times.
Delete Digit Procedure
1 Enter the entry number ( nn = 0 to 15).
Use 0 to match any number of digits.
Dial or type [ nn ].
NN
xx = number entered in Step 1
Press Drop.
Dial or type [ nn ].
Return to Step 3. The next dial plan
routing entry will be displayed on Line 1.
Dial or type [ nn ].
Additional Information
Programming Procedures
PC
2
4–165