AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 386

System Renumbering
0
1
2
3
4
5
6
7 Main Pool
70
*
8 800
9
*
Listed Directory Number (QCC).
†
Remote Access
NOTE: "0" and "7001" are the same station.
Figure 4–3. Set Up Space Numbering
Select System Numbering Plan
!
WARNING:
To avoid possible loss of system programming information, renumber the
system before you program the rest of the options described in this
chapter.
The three available system numbering plans listed below appear on System
Planning Form 2a.
2-Digit. This plan is for systems with fewer than 50 extensions and no
plans to exceed that number in the foreseeable future. Each of the first 58
extension jacks is assigned a 2-digit extension number, beginning with 10
and ending with 67. Any remaining extensions are assigned 4-digit
numbers, starting with 6700 and ending with 6842.
3-Digit. This plan is for systems with 50 or more extensions or plans to
grow to that number in the foreseeable future. All extensions are assigned
a 3-digit number, starting with 100 and ending with 299.
4–14
Programming Procedures
Operator Console (not flexible) 0
Extensions MFMs/Terminal
- -
7100 7299 Adapters
- -
7300 7499
Trunks
- -
801 880
ARS Access (Hybrid/PBX mode)/Idle Line Access 9
- -
100 199
- -
200 299
- -
300 399
- -
400 499
- -
500 599
- -
600 699
- -
7500 7699 Calling Group
- -
770
7920
†
Park 889
- -
881 888
Paging
791, Groups
- - - -
7929 793 799
Pools
- -
890 899