AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 333

Night Service
Console Display/Instructions
13 Select Exclusion List.
_
14 Specify the extension.
15 Assign or remove the extension(s) from the exclusion list.
Enter Enter
Select or
Delete Delete
.
16 Return to the System Programming menu.
Exit
Exit
Select two times.
Night Service with Time Set
Use this procedure to specify the time of day and the days of the week when
Night Service is to be activated and deactivated.
Enter the time of day as 4 digits, using 24-hour notation. Enter the day of the
week as a single digit (0 to 6), with 0 being Sunday. If you enter an invalid
number, the system truncates the number.
If you change the system time while Night Service is active, Night Service is
deactivated automatically and you must manually reactivate it.
Operators can override the timer and turn Night Service on and off manually.
This feature can be deactivated when out-of-the-ordinary situations occur (for
example, a midweek holiday).
Additional Information
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Then, go to Step 16.
On = extension is excluded from list.
Off = extension is not excluded from list.
Continue to add or delete extensions by
repeating Steps 14 and 15.
Common Administrative Procedures
PC
3–197