Displaying Fspf Interfaces; Default Settings - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
0x65(101) 0x00001094

Displaying FSPF Interfaces

Example 25-9
•
•
•
•
•
•
•
Example 25-9 Displays FSPF Interface Information
switch# show fspf vsan 1 interface fc1/1
FSPF interface fc1/1 in VSAN 1
FSPF routing administrative state is active
Interface cost is 500
Timer intervals configured, Hello 20 s, Dead 80 s, Retransmit 5 s
FSPF State is FULL
Neighbor Domain Id is 0x0c(12), Neighbor Interface index is 0x0f100000
Statistics counters :
Number of packets received : LSU
Number of packets transmitted : LSU
Number of times inactivity timer expired for the interface = 0
Default Settings
Table 25-4
Table 25-4
Parameters
FSPF
SPF computation
SPF hold time
Backbone region
Acknowledgment interval (RxmtInterval)
Refresh time (LSRefreshTime)
Maximum age (MaxAge)
Hello interval
Dead interval
Distribution tree information
Cisco MDS 9000 Family CLI Configuration Guide
25-22
displays the following information for each selected interface.
Link cost
Timer values
Neighbor's domain ID (if known)
Local interface number
Remote interface number (if known)
FSPF state of the interface
Interface counters
lists the default settings for FSPF features.
Default FSPF Settings
Chapter 25 Configuring Fibre Channel Routing Services and Protocols
0x00001084
8 LSA 8 Hello 118
8 LSA 8
Default
Enabled on all E ports and TE ports.
Dynamic.
0.
0.
5 seconds.
30 minutes.
60 minutes.
20 seconds.
80 seconds.
Derived from the principal switch (root node).
1 500
Error packets 0
Hello 119 Retransmitted LSU 0
OL-16184-01, Cisco MDS SAN-OS Release 3.x